What Is Buried light

Buried lights are lighting facilities embedded in the ground. Floor lamps illuminate the ground and vegetation on the ground, which can make the landscape more beautiful and pedestrians safer to pass through.

LED energy-saving light sources are now mostly used, the surface is polished stainless steel or aluminum alloy panel, high-quality waterproof joints, silicone seals, tempered glass, waterproof, dustproof, anti-leakage and corrosion-resistant. In order to ensure smooth drainage, it is recommended that the lower part of the floor lamp be installed with gravel.

At present, most floor lamps use LED as the light source. The LED has a long lifespan, which can reach 100,000 hours, and the working voltage is low, which is very suitable for use in solar floor lamps. In particular, led technology has achieved its key breakthrough, and its characteristics have greatly improved in the past 5 years. At the same time, the price-performance ratio has also been greatly improved. In addition, the LED is powered by low-voltage DC, and its light source control cost is low, adjustment of light and shade, and frequent switching are possible, and it will not adversely affect the performance of the LED. It is possible to control color, change the distribution of light, and create dynamic fantasy, so it is especially suitable for solar lawn lights. It has many inherent properties that can lead to undesirable results if not applied carefully. However, the luminous efficiency of LEDs currently sold in the market can only reach 15lm/w, only 1/3 of the three-color primary color high-efficiency energy-saving lamps, and the luminous efficiency of the three-color primary color high-efficiency energy-saving lamps can reach 50 lm/w ~60lm/w .

From the price point of view, the current production cost per lm: three-color primary color high-efficiency energy-saving lamps (including electronic ballasts) 0.022 yuan, in 2002 the price of f5mm white LEDs was 1.9~3.0 yuan, the current production cost per lm is high, Prices vary widely. From the perspective of application life, the life span of tricolor primary color high-efficiency energy-saving lamps (including electronic ballasts) can reach 6,000 hours, and the life of LEDs can reach 100,000 hours. ballasts), but it is not the case.

Most of the solar floor lamps use ultra-bright white LEDs, and the time (life) for ultra-bright white LEDs to reach 50% of the initial intensity under 20ma is less than 10,000 hours. . That is to say, at present, led is not the best solar floor light source in many environments, unless it is a low-grade solar floor light with an application life of only 1-2 years, which is probably a solar lawn light below 1w. For solar floor lamps above 1w, it is best to use three-color primary color high-efficiency energy-saving lamps. At present, some solar floor lamps use 30~40 ultra-bright white LEDs with an input power of 2W or more. In this environment, if you use a three-color primary color high-efficiency energy-saving lamp, the cost is only 1/10 of the LED, and the luminous flux is the original. 4 times, has developed a 2~10w low-voltage DC three-color primary color high-efficiency energy-saving lamp, the life span can reach 6000 hours.

According to the above analysis, we believe that low-power solar floor lamps below 1w that have the ability to adjust light and shade and frequently switch on and off should generally use led as the light source. However, when using ultra-bright white LEDs, special attention should be paid to the luminous flux maintenance rate, otherwise it will easily lead to confusion. For high-power solar floor lamps, it is reasonable to use three-color primary color high-efficiency energy-saving lamps at present. It should be emphasized here that the above conclusion is only a current analysis. When the LED skill level increases and the price decreases, the above conclusion must be changed.

For solar floor lamps, from the aspects of reliability, cost performance, color temperature, and luminous efficiency, we believe that the current ideal light source should be three-color primary color high-efficiency energy-saving lamps.

LED Buried light – LED Underground Lights – Best Inground Lamp Suppliers

Inground lamp is a kind of lamp, the lamp body is made of pressure adze or stainless steel, which is durable, water-proof, and has excellent heat dissipation performance; the cover is made of 304# precision cast stainless steel, which is anti-corrosion and anti-aging; silicone sealing ring, waterproof Excellent performance, high temperature resistance, anti-aging; high-strength tempered glass, strong light transmittance, wide light radiation surface, strong load-bearing capacity; all solid screws are made of stainless steel; the protection level reaches IP67; optional plastic embedded parts are available for easy installation and maintenance.Wonder Lighting is an outdoor lighting manufacturer who uploads LED underground lights. The shell of the shell is made of high-purity aluminum alloy material and tempered glass mask. The lamp bead lamp board adopts a rubber ring potting waterproof design, and the cover is connected to the shell through waterproof. The sealing strip is waterproof and double safety and waterproof technology, so the high-quality LED underground light has good waterproof and dustproof. LED underground lights are different from other outdoor lighting LED lights. LED underground lights have higher waterproof level requirements than LED wall washers.

We Value Customer Satisfaction

In addition, Wonder is committed to one-stop service LED engineering lighting solutions. According to the customer’s specific engineering environment, we provide advice and guidance on the best product recommendation, customization and installation. Professional, innovative, environmentally friendly and energy-saving products and services enable us to ensure 100% satisfaction for every overseas customer.

100% Functional And Final Test

Wonder, as a manufacturer of led lighting industry with a wealth of nearly 14 years experience, we are sure to be your best choice.Win-win cooperation, honest service, mutual support and common development are our eternal vision.We warmly welcome any like-minded friends to join this great cause of green energy conservation and jointly create a better tomorrow for each other.

Research & Development

Highly qualifed R&D devoted into specialled lamp and lighting color customizing

R & D:Wonder Light focus on highly qualified R&D devoted into special led lamp and lighting color customizing. Especially in chip color customizing, PCB layout, driver design, housing customized/Tailored, product control system ect. to provide quality and professional lighting solutions to countries world-wide and insure the 100% satisfaction of every oversea clients.
IQC:We guarantee the quality of our products by putting great emphasis on monitoring and controlling our supply chain. Various tests are done to examine LED color consistency, CRI, and light intensity. At the same time, the” letter of commitment” from each supplier is required to ensure that all materials and components provided by them are of the highest quality complying with RoHS, CE, UL, and / or other standards.
IPQC:Our attention to details are endless. Our products meet all ISO9001:2015 standards and we maintain the quality of our products by controlling and monitoring all critical characteristics and specifications of the product.
QA:To ensure to manufacture a “PERFECT” product, we have implemented a final QC test and series of final functional tests. In addition, we can, if needed, sign a written Quality Commitment for every unit that we produce. In this way, you are guaranteed that our products meets your requirements.
AGING TEST:In order to ensure the quality of our products, we will do aging test for all of our products including LED panel lights, LED strip lights, etc. Aging test consists of running the products with their intended use and operation for at least 48 hours to make sure no defects get to our customers.